Enkay Enterprises
  Home   |   Email   |   Contacts  
Steel & Metal Mechanics
    Servo Universal Testing Machine
Enkay Machines   Servo UTM
EKE 1509
Alpha Series adopts advanced and reliable ball screw electric mechanical load frame structure. The driving system adopts AC servo timing system and motor. The PC controlling system is able to realize the close-loop control of the parameters such as loading force, specimen deformation, and crosshead stroke etc.
  (Hydraulic) Mechanical UTM
  Hydraulic Electronic Microprocessor Based Universal Testing Machine
  Hydraulic Computerized UTM
  Computerized Servo Control UTM
  Computerized Universal Tesitng Machine
  Servo Universal Tesitng Machine
  Universal Tesitng Machine EKE.RDT 100
  Computer Controlled Electronic UTM
  Servo Hydraulic Universal Tesitng Machine
  Universal Tesitng Machine: Servo Series
  WinTest: Material Testing System
  Standard / Optional Accessories
  Torsion Testing Machine
  Rockwell Hardness Tester
  Brinell Hardness Tester
  Universal Pendulum Impact Tester
  Fatigue Testing Machine
  Tensile Testing Machines
  Erichsen Cupping Tester
  Computrised Brinell
Hardness Testing Machine
  Digital Impact
Testing Machine
  Rockwell Hardness
Testing Machine
  Ultrasonic Flaw Detector
  Tensile Testing Machine
with electronic display
  Servo Universal Testing Machine
  EKE - 1509
  Standards followed : ISO 7500-1, ASTM E4, EN10002-2, BS 1610, DIN 51221, ISO6892







Capacity: 60T (Max upto 2000kN)
Single Test Frame with dual zone to conduct Tensile, Compression and flexural test.
Four column load frame with dual pressure hydraulic loading system.
Four Column and two screw construction to allow for a larger, more robust testing area.
Extension resolution from cross head: 1micron (0.001mm)
Display of force, position & strain valves (in kg/ kN/ Lbs/ Tons)
Hand held controller for indicating load elongation, speed for loading and unloading in the manual mode, for pump start/stop, return, max value, crosshead up/dowm and stop.
A variable sample break function to display peak values automatically, and return the crosshead.
Automatic value-Hydraulic safety values (using only Parker & Bosch valves)
Automatic piston zero positioned.
Control System provided with closed-load control, allowing precise control of load, strain and position rates when used with test software, driven by Vfd motor for higher torque.

  Load Measurement & Accuracy:

Load Measurement: Pressure Transducer load weighing system (capacity 400 bars)
Accuracy: ±5% of the indicated load from 0.2% to 100% of capacity.
Resolution : better than 1/100,000 of capacity (0.001kN)
Friction free design : no oil seal for maintenance free operation (cylinder piston lapped to 2 microns finish)

  Basic Testing Clearances:
  450- 575mm clearance between screws
850 - 1000 mm Standard Opening
750 - 850 mm maximum clearance in tension
650 - 850 mm maximum compression clearance
135 -200mm hydraulic stroke
  Servo Universal Testing Machine : EKE 1509


Standard Speed Ranqes:


0 to 100mm /min testing speed
250 - 350 mm/min per minute adjustable crosshead speed
Speed Resolution: 0.005 - 0.02 mm/min can be improved upto 100mm/min


Electrical Equipment:


Motor and Controls- Pump Motor - 1-1/2 H.P. Crosshead Motor - Reversing 1/2 H.P.
200-240 volts ±10%, 50/60 Hz, 3 phase
Internal Control Circuit, complete with magnetic across-the-Iine starter-magnetic reversing controls-overload and under-voltage protection.
Push button controls
Automatic limit switches



  Grips for Tensile Test for specimen of all sizes For Flat Dumbell Specimen
For Flat Dumbell Specimen
Set of four (4) Solid Flat Wedge Grips. For Round Dumbell Specimen
For Round Dumbell Specimen
Set of Four (4) Solid Vee Wedge Grips
  Extensometer for specimen of all sizes




Strain Gage Extensometer with Quick Attachment Kit (50mm gl. with 20% measuring range)
Transverse Tool with adjustable span of 8" to 18", for 120,000lb and higher capacity Super “L”s
Compression platen for Compression Test for specimen of all sizes
Spherically seated Compression Platen of Diameter 250mm, grooved for better gripping.
Attachment for Flexural Test for specimen of all sizes starting 5mm upto 30mm.
  Test Software Package:










Computer 2.4GHz With 4GB RAM and 300 GB Hard Disk or above along with 1000VA UPS and Laser Printer. (H.P. A4)
The computer have Windows operating System, Antivirus, Office 2007 and all other essential softwares for evaluation and testing of Materials.
Test Software is compatible with Windows XP and or VISTA.
Test parameter set-up allow test specific details.
Machine control set-up.
Test result set-up.
Multiple speed set-up for a test. (upto 30 channel programming in segments).
User Customized Reports
Standard SPC Programs for X-bar, R and frequency distribution/ histograms.
The ability to recall, replot, and rescale curves.
Selection of available standard Test Modules for a variety of testing applications using in-built library
The ability to recall test Information spanning Test Modules.
User configurable Machine Parameter and Control Setting for load, displacement & strain.
Advance Modulus calculation.
Test Wizard for creating or modifying test settings.
Standard Device interface to accepts inputs from Micrometers, Calipers.
Password Protection for testing.
Test result Creator.
Test routines for Tensile test, compression test, bend test.

Home  |   About Us   |   Products   |   Services   |   News   |   Contact Us   |   E-mail   |   Sitemap   |   Disclaimer

All rights reserved with Enkay Enterprises